In-Stock: Accessories

Terminal Covers:  High Temperature (for use with post terminals)

Terminal covers

 Catalog No. Post Size
CC10-24 10-24 threads
CC10-32 10-32 threads
CC80-32 8-32 threads
CC80-32 6-32 threads

Individual Ceramic Terminal Covers are designed to protect the operator from exposed terminals.
The cover body is slotted to receive two wires and may be installed after wiring has been completed.

Ceramic Feed Throughs

Ceramic Feed Throughs Cat.No. A-Length B-Dia. C Mount. Hole Dia. D-Screw Size
AC2C0042 .505" .545" .375"   8-32  x   1 1/4"

Ceramic Feed Throughs

 AC2C0500 .312" .375" .250" 6-32  x   1"
AC2C0101 1.000" .560" .560" 1/4-20  x  1 3/4"

Each assembly consists of a male and female ceramic insulator with stainless steel screw with two
flat washers, one lockwasher, two hex nuts, and two fiberwashers.
Ceramic bushings without hardware are also available.

Ceramic Insulating Beads:   High Temperature

Ceramic Insulating Beads

Trade Size Catalog No. I.D. O.D. Length
1 AC2C5000-5 .056" .110" .110"
2 AC2C5000-4 .068" .170" .170"
3 AC2C5000-3 .092" .200" .200"
4 AC2C5000-2 .152" .260" .260"
6 AC2C5000-1 .156" .400" .400"

 

Trade Size Wire Size Beads/Foot Beads/Std
Package
1 16AWG 134 670
2 14AWG 86 430
3 12AWG 70 350
4 8AWG 54 270
6 8AWG 34 170


Sleeving:  Non-Fraying Fiberglass
Temperatures up to 1200°F (650°C) - for abrasion protection and extra
electrical insulation.    Natural (tan) Coloring   100 foot spools          

Catalog No.   Size Nom. I.D. Fits Lead Wire
AC10G0001-17 #17 .047" #26
AC10G0001-14 #14 .066" #24
AC10G0001-10 #10 .106" #20
AC10G0001-8 #8 .133" #16
AC10G0001-4 #4 .208" #10

Sleeving:  Silicone Rubber Coated Fiberglass
Temperatures up to 428°F (220°C) - for abrasion protection, extra electrical
insulation and moisture resistance.   White Coloring   100 foot spools

Catalog No.   Size Nom. I.D. Fits Lead Wire
AC10S0000-13 #13 .076" #24
AC10S0000-10 #10 .105" #20
AC10S0000-8 #8 .133" #16
AC10S0000-6 #6 .166" #14
AC10S0000-4 #4 .208" #10

Conduit:  High Temperature, Stainless Steel, Flexible Type
(for abrasion and flexing protection)   Conduit

Catalog No. I.D. O.D.
C-250 5/32" 1/4"
C-350 1/4" 23/64"
C-375 9/32" 3/8"
C-500 3/8" 1/2"

Terminals:  High Temperature Ring Type

Terminals

Catalog No. Awg. Size Stud Size
HTR2218-6 22-18 6
HTR2218-8 22-18 8
HTR2218-10 22-18 10
HTR1614-6 16-14 6
HTR1614-8 16-14 8
HTR1614-10 16-14 10
HTR1210-8 12-10 8
HTR1210-10 12-10 10


Tape:  Glass Cloth  (High temperature electrical wiring tape)

Tape: Glass Cloth
  • Glass Cloth Tape No.27 is a high heat splicing tape composed of a glass cloth locking and an adhesive that thermosets in high heat application environments.  It is a Class B (130°C-226°F) electrical insulation.
  • Catalog No.27 - 1/2" wide x 66' long

Cement:  High Temperature

Cement: High Temperature
  • This cement insulates electricity but radiates heat.  It also resists acids, oils, and temperatures up to 3000°F.  This is the same cement Hotwatt uses in electric heating elements and can be used for electric kilns, furnaces, and resistors.  The cement hardens into a porcelain-like body by air drying without the use of kilns or injury to the finest resistant wire.
  • Catalog No. C-78, 1 Quart Container.


Wire:  High Temperature Hook-up
300 Volt - 250°C Wire    U.L. and C.S.A. rated for 300V/250°C.

 Wire: High Temperature Hook-up

  1.   Teflon treated fiberglass braid
  2.   Fiberglass
  3.   Teflon tape wrap
  4.   Flexible, stranded nickel conductor
Part Number Awg.Wire Size Max O.D. Maximum Amp. Cap.
at ambient of:
30°C 225°C
9G-N12T-1 12 .165 16.8 8.0
9G-N14T-1 14 .141 12.5 6.0
9G-N16T-1 16 .126 9.2 4.2
9G-N18T-1 18 .110 7.1 3.3
9G-N20T-1 20 .097 5.4 2.4

Features

  • The High Temperature Insulated Wires are for use in internal wiring of domestic,
    commercial, and industrial heating, cooking, and process equipment.
  • Wires are suitable for service up to the rated voltage in damp and dry applications
    with wire temperatures up to 250°C (482°F); with intermittent use in ambients as
    high as 650°F.
  • Wires are identical to that used on our own heating elements.
  • Available in 100 foot and 250 foot spools.


600 Volt-250°C Wire
U.L. and C.S.A. rated for 600V/250°C.

600 Volt-250 Deg.C Wire

Construction

  1. Teflon treated fiberglass overbraid
  2. Teflon tape wrap
  3. Flexible, stranded, Nickel Plated Copper Conductor
Part Number Awg.Wire Size Max O.D. Maximum Amp. Cap.
at ambient of:
30°C 225°C
9G-P10T-2 10 .195 35 22.0
9G-P12T-2 12 .168 28 16.2
9G-P14T-2 14 .147 21 12.0
9G-P16T-2 16 .126 15.4 8.7
9G-P18T-2 18 .116 11.9 6.9
9G-P20T-2 20 .105 9.1 4.8


Resistance Wire:  Nickel Chromium

Features

  • Hotwatt's nickel-chromium wire (80ni-20cr) is proven to deliver outstanding performance
    over extended periods of time and is the same wire we use in our own electrical heating
    elements.
  • Uniformity of resistance
  • Mechanical stability
  • Fine surface finish
  • Consult factory for specifications on other sizes and different alloys which are available.
    Typically Iron-Chromium-Aluminum alloy, Nickel-Iron Alloy, and Thermocouple Alloys.

Round Wire

Catalog Number AWG Size Nominal
Wire Dia.		 Ohm/Ft.
R15 15 .057 .20
R16 16 .051 .25
R17 17 .045 .32
R18 18 .04 .41
R19 19 .036 .50
R20 20 .032 .65
R21 21 .028 .80
R22 22 .025 1.02
R23 23 .023 1.27
R24 24 .02 1.61
R25 25 .018 2.03
R26 26 .016 2.57
R27 27 .014 3.22
R28 28 .013 4.09
R29 29 .011 5.09
R30 30 .01 6.50
R31 31 .009 8.20
R32 32 .008 10.16
R33 33 .007 12.89
R34 34 .006 16.38


Ribbon Wire

Catalog Number Thickness Width Ohms/Ft.
RR-1 .0015" 1/64" 22.75
RR-2 .002" 1/64" 17.36
RR-3 .0031" 1/64" 11.20
RR-4 .0035" 1/64" 9.99
RR-5 .004" 1/64" 8.68
RR-6 .0045" 1/64" 7.12
RR-7 .005" 1/64" 6.95
RR-8 .0056" 1/64" 6.20
RR-9 .0063" 1/64" 5.51
RR-10 .002" 1/32" 9.83
RR-11 .0031" 1/32" 5.60
RR-12 .0035" 1/32" 4.96
RR-13 .004" 1/32" 4.34
RR-14 .0045" 1/32" 3.86
RR-15 .005" 1/32" 3.47
RR-16 .0063" 1/32" 2.76
RR-17 .0031" 1/16" 3.17
RR-18 .0035" 1/16" 2.81
RR-19 .004" 1/16" 2.46
RR-20 .0045" 1/16" 1.93
RR-21 .005" 1/16" 1.74
RR-22 .0056" 1/16" 1.55
RR-23 .0063" 1/16" 1.38
RR-25 .0031" 3/32' 2.11
RR-26 .0035" 3/32" 1.87
RR-27 .0045" 3/32" 1.46
RR-28 .0063" 3/32" .91
RR-29 .0031" 1/8" 1.59
RR-30 .0035" 1/8" 1.40
RR-31 .004" 1/8" 1.23
RR-32 .0045" 1/8" 1.09
RR-33 .005" 1/8" .98
RR-34 .0056" 1/8" .88
RR-35 .0031" 3/16" .88
RR-36 .0035" 3/16" .78
RR-37 .004" 3/16" .68
RR-38 .0045" 3/16" .60
RR-39 .005" 3/16" .54
  • Hotwatt will also supply resistance wire in coil form to your
    specifications.  Consult factory for details.
  • Refer to current carrying capacity tables below.

In-Stock:  Technical Information

Current Carrying Capacity of Straight Nickel Chromium Wire
Approximate Amperes to heat a Straight, Oxidized wire in quiet air to given temperature

Degrees F 400 800 800 1000 1200 1400
Degrees C 205. 315 427 538 649 760
A.W.G.
or
B. & S.		 Inches
Dia.

Amperes
15 .057 7.2 10.0 12.8 16.1 20.0 24.5
16 .051 6.4 8.7 10.9 13.7 17.0 20.9
17 .045 5.5 7.5 9.5 11.7 14.5 17.6
18 .040 4.8 6.5 8.2 10.1 12.2 14.8
19 .036 4.3 5.8 7.2 8.7 10.6 12.7
20 .032 3.8 5.1 6.3 7.6 9.1 11.0
21 .0285 3.3 4.3 5.3 6.5 7.8 9.4
22 .0253 2.9 3.7 4.5 5.6 6.8 8.2
23 .0226 2.58 3.3 4.0 4.9 5.9 7.0
24 .0201 2.21 2.9 3.4 4.2 5.1 6.0
25 .0179 1.92 2.52 3.0 3.6 4.3 5.2
26 .0159 1.67 2.14 2.60 3.2 3.8 4.5
27 .0142 1.44 1.84 2.25 2.73 3.3 3.9
28 .0126 1.24 1.61 1.95 2.38 2.85 3.4
29 .0113 1.08 1.41 1.73 2.10 2.51 2.95
30 .0100 .92 1.19 1.47 1.78 2.14 2.52
31 .0089 .77 1.03 1.28 1.54 1.84 2.17
32 .0080 .68 .90 1.13 1.36 1.62 1.89
33 .0071 .59 .79 .97 1.17 1.40 1.62
34 .0063 .50 .68 .83 1.00 1.20 1.41
35 .0056 .43 .57 .72 .87 1.03 1.21
36 .0050 .38 .52 .63 .77 .89 1.04
37 .0045 .35 .46 .57 .68 .78 .90
38 .0040 .30 .41 .50 .59 .68 .78
39 .0035 .27 .36 .42 .49 .58 .66
40 .0031 .24 .31 .36 .43 .50 .57

Current Carrying Capacity of Ribbon Nickel Chromium Wire
At 1200°F Approx.

                                                                     Width-Inches

Thickness
Inches

 1/64 1/32 1/16 3/32 1/8 3/16
Amps
.0063 1.56 2.89 5.5 8.2 10.1 16.6
.0056 1.45 2.69 5.2 7.2 9.5 15.6
.0050 1.35 2.52 4.9 6.8 9.0 14.7
.0045 1.26 2.38 4.6 6.4 8.5 14.0
.0040 1.18 2.23 4.1 6.0 8.0 13.1
.0035 1.09 2.07 3.8 5.6 7.5 12.3
.0031 1.01 1.94 3.6 5.3 7.0 11.5
.0020 - - - - - -
.0015 4 - - - - -


Heater Release and Transfer Agent

Hot Lube
acclube.gif (18554 bytes)

 

 

 

 

     Directions
  • Heater surface should be clean and dry.
  • Shake Hot Lube well before use.
  • Brush on a light uniform coat of Hot Lube.
  • Allow to air dry for 20 minutes or oven dry at low
    temperature (140°F maximum).
  • Hot Lube can greatly reduce heater-to-bore seizure
    when properly applied.
  • Improves Thermal Conductivity.  Heat transfers more
    quickly from heater to part being heated when Hot
    Lube is used.
  • Increased Heater Life.  Tighter fit made practical with
    use of Hot Lube.
  • Not electrically conductive.
  • Hot Lube solution is not considered hazardous.
  • Easy to use.
  • Withstands Temperatures to 1600°F (875°C).

Available from stock, call your nearest Hotwatt Distributor.

Ordering Information:  4 ounce container catalog no. - ACHOTLUBE004

CAUTION:  DO NOT ALLOW HOT LUBE TO COME IN TO CONTACT
                     WITH LEADWIRES OR LEAD END OF HEATER.

 
Atlantic Thermal Sales, Inc.
1-B Business Way - PO Box 39
Hopedale, MA 01747-0039
info@atlanticthermal.com

Back
Atlantic Thermal Sales, Inc. Home Page